Can’t figure out how to solve Poppy Playtime 2’s Conveyor Belt puzzle? Don’t worry! Here’s our step-by-step guide on how to solve it and get the Bunzo Toy!
Use the pole to swing across the next area. After reaching a dead-end, look up again and you’ll notice another pole you can use. You will do this again after another dead-end.
Next, enter the vent on the left wall. Another pole will be found at the end of the room when you look up. Keep following the path, up the staircase, and turn left. Here, you’ll find the Water Treatment facility.
Poppy Playtime 2: Conveyor Belt Puzzle Guide
Get the document found on top of the control panel. You will have to solve the puzzle to be able to cross the platform. The sequence is as follows:
L > L > R > R > L > R > L
Once you’ve positioned the bridge correctly, head down and go straight, then left. You will be in another puzzle room. Step onto the platform.
The goal here is to obtain one of the toys going around the tubes. Observe the pattern and make sure there’s a toy before you push the buttons!
First, push the Red Button on the wall to change the direction of the arrow (from right to left). After doing so, pull and hole the lever going up (right lever) to ascend. Keep going up until you see a Blue Button on the opposite wall and hit it to change the direction of the next group of tubes.
Next, hit the Yellow Button to once again, change the direction of the toys. Lastly, pull up the level to reach the very top of the factory. Here, it gets a little bit more tricky. You will need to time pushing the button so that you will “trap” the toy into going to your platform instead. To do this, wait until a toy is past the arrow mark before pushing it to change the direction towards you.
Don’t forget to collect your statue! Simply go to the top of the room and turn to your right and it will be sitting on top of a ramp.
Go back to the Water Treatment facility. You will need to go to the other room to proceed. The right sequence is as follows:
L > L > L > R > R
Head over to the room on the right. Place the Bunzo toy over the Toy Scanner to open the door!
If you have any questions regarding Poppy Playtime 2’s Conveyor Belt puzzle, feel free to ask in the comments below. For more content, stay with us, here at Spiel Times.
Make sure you subscribe to our push-notifications and never miss an update from the world of video games, cinema, and sports. You can also follow us on Twitter @spieltimes for the latest PS5 restock and drop. Until next time, Stay Safe and Happy Gaming!